Stair tread bolts Set 3624C, flush installation, T=30 mm in hardwood
CHF 10.40
excl. VAT
No additional machining of the treads: Simply rest each tread on the support and screw it in place. This saves time and money.
Set 3624C in INOX A2 for screwing flush into hardwood stringers. Embedment depth T = 30 mm, hole Ø25 × 30 mm, without sound insulation. Includes Waxilit lubricant and a TX tread fixing screw.
Can be combined with LamiFIX tread suspension systems.
Stair tread bolts Set 3624C – T = 30 mm – simply rest the treads on the supports and screw them in place
Rest the treads on the supports and screw them in place – no additional tread machining required. Version C is the most economical LamiFIX system for fixing stair treads at the side. The tread connector requires neither a groove nor a mounting hole in the tread. This saves machining time, installation time and costs.
Application and design
Set 3624C in INOX A2 screws flush into a hardwood stringer. This version has an embedment depth of T = 30 mm. The fixing has no sound insulation and is intended for single-family homes.
Installation and selection
The specified hole in the stringer is Ø25 × 30 mm. Insertion tool LF 2151.036.3 is used to screw in the tread support. The wood species and grain direction determine the correct length of the stair connector.
Supplied components and ordering
- Stair tread bolt in INOX A2
- Waxilit lubricant
- TX tread fixing screw
- Article number: LF 3624.530.4
- For 100 pieces or more: LF 3624.530.6
Fitting and installation
The mounting hole in the timber is Ø25 mm. Select the drilling depth and a suitable timber structure using the Set table in the product gallery. Install the bolt using Waxilit lubricant and the insertion tool for version C. Then place the stair tread on the support and secure it with the TX tread fixing screw.
Accurate holes with drill bushes
The holes must be drilled at the correct angle and position. For stairs without stringers, we lend suitable drill bushes free of charge for a maximum of three months. The drilling guide is shown in the LamiFIX catalogue on page 26 .
Suitable drill bits and installation tools
Available separately:
Compatible with tread suspension systems
Version C can also be combined with LamiFIX tread suspension systems. Depending on the stair design, choose between the Ø10 mm tread suspension system and the Ø16 mm tread suspension system . The treads are suspended from the handrail or ceiling; the rods are made to measure.
Additional information
| Pack size | |
|---|---|
| Fixing substrate | |
| Tread support | |
| Sound insulation |
